It consumes a lot of time and energy, not to mention that you also need the help of a specialist for most solutions. This makes heating solutions, which are incredibly expensive in the long run, even more expensive.
You also have to wait for the specialist and you cannot use your home until the work is done. All this without any guarantee that the end result will be what you expect.
The solution is RENOVA floor heating without concreting! A heating solution that allows you to achieve the luxurious feeling of underfloor heating on your own, without having to leave the comfort of your home for a long time and spend a fortune on a professional.
You don't need demolition work or professional help. The system can be easily installed by yourself with the help of our guide.
It is not simply fast and simple, but the system can be loaded within a few hours after installation.
Underfloor heating, in contrast to convection heating, is a low water temperature system. This means that the water does not have to circulate at 70°C in the pipes, only 35-42°C water is enough to achieve the same heat.
The entire heating system does not exceed 3 cm, which already includes the floor heating pipe and the covering.
The underfloor heating can be combined and supplemented with other heating systems. It is best to combine it with ceiling or wall heating, as they also work on the same principle.
After installation, there is no need to wait for drying time, the floor can be walked on and loaded immediately.
Whether it is a laminate floor or a cold covering, underfloor heating without concrete can be covered as well.
Underfloor heating, in contrast to convection heating, is a low water temperature system. This means that the water does not have to circulate at 70°C in the pipes, only 35-42°C water is enough to achieve the same heat.
Yes, this system is the most suitable for renovation, as it is not necessary to break up and transport the old concrete layer, but you can place the system plate on the already existing concrete layer and wrap the floor heating pipe into it.
It is not necessary to glue it on the entire surface, on the edges.
It is not necessary if the cover is even.
Yes, it is possible to cool with the system either in the floor or mounted on the wall. Cold water circulates in the summer and warm water in the winter.
The dry floor heating system plate is provided with 2.5 cm insulation, additional insulation can be placed under this insulation as needed, but it is not necessary.
Tile adhesive suitable for floor covering must be used.
Stone or wood cladding can also be used.
The system can be regulated in the usual way with a thermostat or a telephone "smart home" system.
Yes, it can also be operated with a heat pump. The inlet water temperature is 35-40 degrees in winter and 16-18 degrees in summer.
Including the tile, the thickness of the RENOVA floor heating system fits in 3.5 cm.
Water at 35-40 degrees circulates in the system, the surface temperature is around 25 degrees, this temperature does not justify cracks in the floor covering.
EN 
HU 
RO 
